Drop Former Stator Shaft
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
The stator is a partially biased circular column stick, inside which there is a material trough and two hot medium channels for heating and heat insulation. The material enters the material trough and is discharged by the metering bar. The two hot medium channels use heat conducting oil or hot water or steam, which prevents material in the trough from solidification. The stator can rotate ±10°to adjust the dropping angle , thus achieving high quality grain shape. The stator can also rotate ±90° to install high and low viscosity metering bars. The rotation of the stator is controlled by the joystick at the stator end.
- Drop Former Rotating Shell 1 Pieces / (Min. Order)
- Release Agent Tank 1 Pieces / (Min. Order)
- Steel Belt 1 Pieces / (Min. Order)
- Drop Former Rotating Shell 1 Pieces / (Min. Order)
- Product Receiver 1 Pieces / (Min. Order)
- Product Filter 1 Pieces / (Min. Order)
- Petro-resin Pastillator 1 Pieces / (Min. Order)
- Rosin Pastillator 1 Pieces / (Min. Order)
- Resin Pastillator 1 Pieces / (Min. Order)
- Antioxidant Pastillator 1 Pieces / (Min. Order)
- Wax Pastillator 1 Pieces / (Min. Order)
- Sulfur Pastillator 1 Pieces / (Min. Order)